Patented Easy Wood Tools Hollowers are designed to offer a fresh, new approach to hollowing wood vessels. Easy Wood Hollowers allows any skill level to achieve professional results with minimal effort. The flat tool bar of these Hollowers is designed to be kept level and flat on the toot rest. The cutter is moved straight into the work and swept side to side removing material. This approach greatly simplifies the hollowing learning curve with no complicated cutter angles to learn and constantly adjust while turning. The #1 Hollower accomplishes the initial stage in creating hollow forms- boring the center hole and removing the bulk of material in the center of the vessel. The #2 Hollower then cleans out the intermediate and sides of the vessel and prepares to undercut the rim. Finally, the #3 Hollower clears out and undercutting the sides and rim of the vessel. All tools come loaded with one round Ci5 carbide cutter. This 3/8” diameter cutter is the smallest offered by Easy Wood Tools. When it gets dull, you loosen the screw, rotate the cutter ¼ turn for a sharp, fresh cut. You will never need to perform complicated lathe tool sharpening procedures ever again! The round cutter is specially designed with the optimal grind, geometry and grade of carbide to excel at woodturning.
WARNING: This product can expose you to chemicals including lead which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/